A “Chainless” Power & Free Conveyor?

with 2 Comments on A “Chainless” Power & Free Conveyor?

A “Chainless” Power & Free Conveyor?

Construction

The IntelliFinishing conveyor is a bolted together floor supported system with friction driven trolleys on a rotating tube instead of a chain to drive the system.  Due to the bolt together construction, this conveyor can be easily modified and moved and can be installed in half the time of conventional conveyor systems. We offer a variety of conveyor models with the ability to handle different weight categories which enables us to further customize a system to fit your specific process needs

Maintenance Free

With our Chainless Power & Free there is no maintenance or mess of keeping the conveyor constantly lubed, additionally there is no mess or contamination of lubes, oils, or grit falling onto the parts processed.  All of the moving components in the conveyor system are lubricated for life.

Operation

Each conveyor section has a separate motor which allows individual sections of the conveyor to speed up a part in a process area or slow a part down based on the part recipe. The separate motors also turn off and on the individual conveyor sections when there is a part present making this system more energy efficient because the full system isn’t always running, only the process areas being used at the given time. Additionally, the Chainless Power & Free conveyor has a much quieter operation due to no metal on metal noise.

 

Capabilities of the Conveyor (partial list):

  1. Change processes or destinations of products with immediate system response
  2. Set up in-line speed changes
  3. Run trolleys both forward and backwards
  4. Stop a carrier for processing without stopping the entire line or holding up production
  5. Easily incorporate vertical lifts and shuttles to move parts to another line without unloading
  6. Negotiate inclines and declines
  7. Accumulate loads in line
  8. Have both driven and non-driven lines on the same system
  9. Dip the conveyor into tanks
  10. Run the conveyor through Dry-off and Cure Ovens up to 450 degrees
  11. Highly configurable and modular

What is a Recipe-Based Finishing System?

with 1 Comment on What is a Recipe-Based Finishing System?

Recipe Based Finishing System

With a Recipe-based system, carriers with dissimilar parts can run back to back and each can be treated differently based on the process data entered into the system as a “recipe”. There is no longer a need for batching your whole line with like parts to get quality.  When you enter commands or process instructions for each part family or group of characteristically like parts each time that “recipe” is selected at the loading point all of those like parts will receive the same process.  If you have a different carrier of parts, all the operator needs to do is select that recipe at the load area HMI screen. When that carrier gets to a process area, the system will automatically run the selected process for that part family.

In the Wash:

The recipe entered allows for different types of metals or parts with different pretreatment requirements to each have their own unique wash Recipe.  For example it is possible to remain longer in a section, skip a section, or bypass the whole wash.  If you have changes in your wash process due to extra dirty parts or changes in chemicals requiring your system timing to be different all you need to do is update the recipe.

In the coating application:

In the coating application area, displays show the process for each part coming through, where to apply the coating, which color, and any special instructions unique to those parts.  For applications with masking options, the work instructions show pictures of where to apply masking, caulking, or any other special procedures.

In the cure:

Thick parts and thin parts do not need to be run separately in a batch mode.  With a recipe based system, parts that have 20 minute cure time and parts that have a 40 minute cure time can be run on the line at the same time.  You will no longer over-bake your thin parts just to make sure that your thicker, longer curing parts get cured as desired.  Ovens can adjust temperature, air turns, and cure time depending on the parts loaded on the system.