Tag Archive for: automated finishing system

What We Mean by Smart Controls in an IntelliFinishing System

In modern manufacturing, finishing operations can no longer afford to be rigid, one‑speed, one‑recipe processes. Product mix is broader, quality expectations are higher, and plants are under constant pressure to do more with less space, less energy, and less rework. When we say IntelliFinishing uses smart controls, we’re talking about a fundamentally different approach to how a finishing line thinks, decides, and adapts.

Smart controls are not just about automation—they’re about intelligence.

If you’d like to view a video with our SCADA crew engineering manager talking about this topic, click here: What are Smart Controls in an IntelliFinishing System?

Smart Controls Start with Recipes, Not Line Speed

Traditional conveyorized finishing systems—monorail and basic power‑and‑free systems—are typically built around a single fixed line speed. That speed becomes the “recipe,” whether or not it’s ideal for every product moving through the line.

In an IntelliFinishing system, smart controls begin with recipes tied to each carrier.

Before a carrier even enters the system, recipe parameters are assigned. Those parameters can control:

  • Wash times and spray pressures
  • Oven temperatures and dwell times
  • Conveyor speeds at individual stations
  • Oscillation or directional movement where needed

Because recipes travel with the carrier through the system, each product gets exactly the process it needs—not a compromise based on the limits of a single-speed conveyor.

Intelligent Routing and Sortation Decisions

Another defining feature of smart controls is the system’s ability to make real‑time routing and sortation decisions.

As carriers move through an IntelliFinishing line, the controls can dynamically decide where each carrier should go based on data such as:

  • Paint color
  • Due date
  • Production priority
  • Work order status
  • Downstream availability

This intelligence makes it possible to route carriers into storage banks, pull them out when the right booth is available, or sequence jobs in the most efficient order. Instead of forcing production to adapt to the conveyor, the conveyor adapts to production.

A Smarter Alternative to Traditional Conveyor Systems

Conventional monorail and power‑and‑free systems offer very limited control options. Many operate with minimal logic, sometimes without a PLC, and almost never with a true SCADA layer. Routing options are fixed, recipes are nonexistent, process equipment integration with the SCADA layer, and allowing HMI’s to consolidate all operational information, does not occur, as well as our conveyor can reverse direction –  pretty much impossible for chain systems.

Smart controls change that equation.

With IntelliFinishing, individual carriers can move forward or backward, enabling:

  • More compact system footprints
  • Bidirectional movement instead of one‑way flow
  • Greater routing flexibility without complex mechanical add‑ons

This flexibility allows engineers to design finishing systems that fit the plant—not the other way around.

Improving Consistency and Reducing Rework

One of the biggest advantages of smart controls is process consistency.

In a traditional system, every part is forced through every station at the same speed, even if some products need more paint time, longer cure cycles, or gentler wash conditions. That mismatch often leads to under‑cured coatings, over‑baked parts, or incomplete cleaning—all common causes of rework.

Smart controls give manufacturers fine‑grained control at the station level. Carrier speeds can be slowed, stopped, or even oscillated in paint booths, washes, shot blasts, or ovens. Carriers can also accelerate where appropriate in non-production areas to help make up for the gaps that sap system throughput and are so common on traditional systems.

The result is a process that is tuned to the product, not the limitations of the conveyor—leading directly to higher quality and less rework.

SCADA at the Core: Integration Beyond the Paint Line

At the heart of IntelliFinishing smart controls is a SCADA‑based platform, acting as the central nervous system of the finishing line.

Because of this architecture, IntelliFinishing systems can:

  • Interlock with other PLCs controlling washers, ovens, chemical, or wastewater systems
  • Pull alarms and status data into a unified interface
  • Provide operators with real‑time visibility across the entire process

More importantly, smart controls don’t stop at the finishing line. Through databases and modern APIs, IntelliFinishing systems can integrate directly with ERP and manufacturing software.

Work orders, due dates, and color information can flow from the ERP down to the line—allowing the finishing system to automatically prioritize jobs, group like colors, and optimize throughput based on real business data. Likewise, line data can flow back to the ERP for assembly scheduling purposes or other data-driven reasons.

Turning Data into Actionable Insights

Smart controls also mean smart reporting.

Every carrier in an IntelliFinishing system generates a complete digital history, including:

  • Product metadata (color, order, due date)
  • Entry and exit timestamps
  • Total process duration
  • Process equipment status during application such as oven temperatures, etc.

That data can be viewed at the individual carrier level or aggregated across shifts, days, or weeks. Manufacturers can quickly identify bottlenecks, track takt time performance, and see where the process is being blocked or starved.

Instead of guessing where problems exist, teams can make decisions based on real operational data.

Designed for Operators, Not Just Engineers

Advanced controls don’t have to be intimidating. IntelliFinishing systems are designed so end users can adjust recipes, routing rules, and operational parameters without requiring constant supplier intervention.

Customers receive:

  • Detailed operator manuals
  • On‑site, hands‑on training
  • Ongoing remote support and screen‑sharing assistance

This approach ensures plant teams can confidently adapt the system as conditions change—new products, new priorities, or new production goals—without rewriting the entire control strategy.

Smart Controls Are About Control, Flexibility, and Intelligence

When IntelliFinishing talks about smart controls, we’re talking about a system that:

  • Thinks in recipes, not line speeds
  • Makes real‑time routing decisions
  • Integrates seamlessly with most plant and business systems
  • Improves quality while reducing rework
  • Empowers users with an easy-to-use interface and access to historical data, along with increased system flexibility

Smart controls aren’t an add‑on. They’re the foundation of what makes IntelliFinishing a smarter way to finish.

Who wouldn’t want a smaller finishing system footprint, elimination of gaps in the line, energy efficiency, quicker installation, and quieter operation?

Smaller Footprint, Bigger Impact: How Modern Conveyor Design Transforms Finishing Operations

In finishing operations, space is expensive, downtime is painful, and inefficiency quietly erodes profitability. Conveyor systems sit at the center of all three challenges. Traditional power-and-free or chain-based conveyors often force manufacturers into larger floor plans, longer installation timelines, and ongoing productivity losses caused by gaps in the system.

Modern friction-based conveyor solutions are changing that equation—allowing manufacturers to do more in less space, install faster, and adapt quickly when conditions change.

To watch videos about this topic and other advantages of the conveyor used by IntelliFinishing click these links:  A Walkthrough of Our Modular System Design with Tom Robertson, President of IntelliTrak and here: How does the Conveyor Help with Finish Quality, Smaller Footprints, and Faster Installations? – YouTube

Eliminating Gaps to Reduce Space and Increase Throughput

All traditional chain-based conveyorized finishing systems allow gaps between parts. Those gaps exist for many reasons, but the outcome is always the same: lost production.

“Gaps are dollars lost,” according to Tom Robertson, President of IntelliTrak – the conveyor used in IntelliFinishing Systems. Capital equipment—washers, booths, ovens—costs money whether product is running or not. When gaps exist, that equipment is underutilized, even while depreciation keeps ticking.

Monorail systems are especially limiting because gaps cannot be closed at all but even Power-and-free systems cannot close a gap until the carrier reaches an accumulation zone – and very few P&F systems include accumulation zones. Meanwhile, those P&F systems that have accumulation zones force users into longer conveyor paths and larger footprints to maintain throughput.

By contrast, the IntelliTrak conveyor system used by IntelliFinishing is designed to actively close gaps and create queues ahead of critical processes. This ability allows manufacturers to:

  • Maximize throughput at key operations
  • Shorten overall conveyor length
  • Reduce the facility footprint required to achieve production targets

In many cases, higher output is achieved not by adding equipment, but by using existing equipment more efficiently—and in less space.

Heating Only the Product, Not the Conveyor

Ovens are often the largest space and energy consumers in a finishing line. Traditional chain conveyors move not only the product but also large amounts of steel—chains, trolleys, and running gear—through cure and dry-off ovens. Even the support structure for the conveyor is typically inside the oven.

“Now you’re heating all that extra steel to cure temperature,” Tom Robertson explained. “That’s a lot of wasted energy.”

Beyond energy loss inside the oven, that heat is then carried back into the plant, increasing cooling requirements and further driving up operational costs.

IntelliTrac changes this dynamic by moving only the product through ovens. The benefits stack quickly:

  • Smaller ovens can be used for the same output
  • Less heat mass means faster ramp-up and recovery
  • Reduced heat bleed back into the facility
  • Lower energy consumption overall

The result is not only a smaller physical footprint for oven systems, but also a more comfortable and efficient production environment.

Designed for Flexibility When Staffing and Demand Change

Modern manufacturing rarely runs under perfect conditions. People call in sick. Weekend crews are smaller. Demand fluctuates.

Traditional conveyor systems struggle in these conditions because they are designed to run “all or nothing.” IntelliFinishing, however, introduces recipe-based control that allows the system to adapt on the fly.

Operators can adjust:

  • Processes such as timing per stage or pressure in a wash, oven times, booth selection, cooling time, etc.
  • Jobs per hour based on other limiting factors such as labor availability or cure time requirements
  • Zone use for specialized functions like masking, shotblasting, or quality control
  • Conveyor speed and accumulation behavior

If staffing is limited, the system slows down, runs only the zones that are staffed, and reduces energy usage—without requiring physical changes to the line. This flexibility allows manufacturers to design efficiently sized systems instead of oversized ones “just in case.”

Bolt-Together Design Enables Faster, Parallel Installation

One of the biggest hidden costs in finishing projects is installation time. Traditional conveyors often dictate the construction sequence—everyone else waits until the conveyor is in place.

IntelliFinishing takes a different approach.

Because the conveyor is bolt-together and modular, installation can be planned around other equipment. The team collaborates with oven, washer, and blast suppliers to define ingress and egress paths, leaving key areas open for rigging large equipment.

While ovens or washers are being set, conveyor installation can proceed in other zones. This parallel approach means:

  • Shorter overall installation timelines
  • Less inter-trade waiting
  • Faster time to production
  • Reduced disruption to existing operations

For brownfield facilities working within tight spaces, this flexibility can be the difference between a feasible project and an impossible one.

Clean, Quiet Conveyance That Fits Modern Facilities

Beyond footprint and speed, friction-based conveyor technology offers day-to-day operational improvements. Traditional chain systems require lubrication, creating dirt, grime, and drip pans—especially problematic in finishing environments.

IntelliTrac’s friction wheel design runs on extruded tubing, eliminating grease, reducing maintenance, and keeping the line clean. The system is also significantly quieter, improving operator comfort and safety.

These benefits allow manufacturers to integrate finishing lines into tighter, cleaner production environments without the mess or noise traditionally associated with conveyors.

Smaller Systems, Smarter Design

The takeaway is clear: modern conveyor design isn’t about bigger systems—it’s about smarter ones.

By eliminating gaps, reducing unnecessary heat mass, enabling recipe-driven flexibility, and allowing parallel installation, IntelliFinishing helps manufacturers:

  • Shrink required floor space
  • Install faster
  • Adapt to real-world operating conditions
  • Maximize the return on capital equipment

In a world where space, energy, and labor are all at a premium, the ability to do more with less isn’t just an advantage—it’s a necessity.

 

Liquid vs. Powder Coating: Which Finishing System is Right for Your Operation?

Liquid paint systems or Powder paint systems? When you’re looking to upgrade or automate your finishing system, the “Liquid vs. Powder” debate is usually the first hurdle. If you’re currently running manual lines for both, or considering a move from liquid to powder, the choice can feel like a trade-off between efficiency and flexibility. As […]

Read more